The Ride Custom Back has long been the premier wheelchair seating solution for achieving optimum postural support, balance and control. The original firm, breathable composite foam liner allows for a thin profile and helps to keep the sitter dry and comfortable in virtually any climate.
Then Ride further revolutionized custom molded seating by offering the option of a soft foam insert on the Ride Custom Back. This soft option simply provides a more forgiving user interface with the exacting support of the Custom Back shell.
Always aiming to improve Ride products, we’re excited to announce a third liner option for the Ride Custom Back! Made from ultra-breathable 3D mesh, this liner performs as well as the original composite liner — yet it’s more breathable. While allowing increased air flow, the Ultra-breathable liner retains even less moisture than the original, making it easier to wash and quicker to dry. In-field modifications are a breeze. Even better, there is no additional charge associated with selecting this liner option.
From Ride’s perspective, the Complex Rehab Industry appears to be recovering well, as we are seeing incoming orders at a rate consistent with previous years. There remains uncertainty about the ability for recovery to continue at the current pace in the coming months. While we remain optimistic and committed to operating full-steam ahead, we encourage you to submit orders as soon as possible to ensure year-end delivery.
Thanks to all of you out in the field who are back at it — working with people whose lives often depend on getting appropriate seating and complex rehab technology.
Throughout 2020, Ride has been able to fulfill custom product orders within 12 days over 98% of the time. Recently 85% of custom orders have shipped within 8 days.
We love getting messages like this one, from Dave Blaser of NuMotion:
“You guys got inputted one of my castings on the 20th and it’s freaking at my door already… that’s 10 days for a Custom Back!”
We expect the usual uptick in orders as folks try to deliver seating systems before year-end. So we’re encouraging everyone to get their orders in the pipeline as soon as possible, especially with so many unknowns due to COVID-19. You can count on Ride to do everything we can to get your orders filled as quickly as possible.
We thank you for your business. Work smart, be well, Ride on!
In our last post, we discussed documenting the need for a custom wheelchair back or cushion vs. a prefabricated back or cushion. Here, we continue the documentation discussion…
Less Costly Alternatives?
Funding sources, including Medicare, expect clinicians to document the reason one custom product is selected over others that may be less costly. Here are some of the differentiating reasons that Ride Custom 2 Cushions and Ride Custom Backs may be selected over other custom cushions and backs.
Ride Custom Cushion:
• Unlike other custom-molded wheelchair cushions, Ride’s patented and evidence-based mechanism of support helps to enhance sitting stability and performance, while reducing the dangerous forces of pressure and shear from at-risk bony prominences. Jane’s inability to perform a functional weight shift places her at high risk for pressure injuries, and the design of the Ride Custom 2 Cushion is critical to maintaining her skin integrity.
• Unlike other custom-molded wheelchair cushions, the Ride Custom 2 Cushion is modifiable in the field, without factory intervention or cost, to accommodate changes in Jane’s pelvic presentation over time.
• Unlike other custom-molded cushions, the Ride Custom 2 Cushion manages heat and moisture and can be cleaned and sanitized to provide a healthy microenvironment. This is critical for Jane Doe as she resides in a warm, humid client, and is at risk for pressure injuries.
Ride Custom Back:
• Unlike other custom-molded backs, the Ride Custom Back has a thin profile and multi-axial hardware which enables precise adjustment of lateral orientation to bring the head and neck to midline over supported residual scoliosis. Jane requires the thin profile to maximize upper extremity range of motion and function, and requires the multi-axial hardware to adjust the position of the back to optimize her stability and postural alignment.
• Unlike other custom-molded backs, the Ride Custom Back manages heat and moisture, and can be cleaned and sanitized to provide a healthy microenvironment. Jane’s warm and humid environment make this medically necessary.
If you need assistance with documentation review for your Ride Custom Back and/or Cushion order, we can help, and at no cost to you! Contact our Reimbursement Department at (866) 781-1633 x 312.
In our last post, we discussed Medicare’s documentation requirements for custom wheelchair backs and cushions. Here we continue the series…
In the written therapy evaluation — why Ride Custom over prefabricated cushions and backs?
The beneficiary may present with: specific body measurements, significant postural deviations, contractures, pelvic tilt, obliquity, rotation, etc. that cannot be accommodated by a prefabricated cushion or back.
These presentations should be well documented to demonstrate the reason a prefabricated cushion or back will not provide sufficient skin protection and/or postural support. Documented trial and failure of lower level equipment is beneficial.
Example: Jane Doe presents with a very pronounced anterior pelvic tilt, a left pelvic obliquity, a left lumbar convex scoliosis, a right convex thoracic scoliosis, a marked thoracic kyphosis, and a forward head. Her lower extremities assume a position of abduction. Her legs exhibit a leg length discrepancy with the right lower extremity being shorter than the left.
There are no prefabricated wheelchair cushions that will accommodate these postural deviations to provide sufficient stability and pressure management. There are no prefabricated backs that will provide accurate contour to accommodate and support Jane’s posture.
With lack of sufficient pelvic and trunk support, Jane is at risk for developing progressively more severe postural asymmetries as well as pressure injuries. In addition, a poorly fitting prefabricated seating system will severely limit Jane’s ability to independently perform mobility-related activities of daily living.
A Ride Custom 2 Cushion and Ride Custom Back will be made specifically to match Jane’s complex shape, helping to decrease long-term skin risk and aiding in sitting stability for improved functional performance.
Navigating the U.S. Medicare guidelines for documenting the medical need for custom seating can seem daunting. We’ll break it down for you here.
To start, Medicare requires that a beneficiary needing custom seating is seen by a Physical or Occupational Therapist to evaluate the seating needs, in addition to a physician. The documentation generated by the physician and therapist will need to contain three primary pieces of information:
The beneficiary meets Medicare’s coverage criteria for the wheelchair on which the seating will be installed.
The beneficiary’s condition and diagnosis meet Medicare’s criteria for custom seating. Specifically:
For custom backs – there are documented, significant postural asymmetries that are the result of a qualifying diagnosis.
For custom cushions – there is a documented, current pressure ulcer or history of pressure ulcer on the lower back, sacrum, hip or buttock, OR documented absent/impaired sensation in these same areas, OR documented inability to perform a functional weight shift, as the result of a qualifying diagnosis.
A statement clearly explaining why a prefabricated seating system will not sufficiently meet the medical need of the beneficiary. (This piece of information cannot come from the physician alone, it must be in the written therapy evaluation).
If you need assistance with documentation review for your Ride Custom Back and/or Cushion order, we can help, and at no cost to you. Simply contact our Reimbursement Department at (866) 781-1633 x 312.